Machining slots with one-piece turning

Send

The slot itself is an element of cut, a cut processed in a special way. Its main difference from a conventional cut is that one part of the slots overlaps the other.

As a rule, the slot is located in the middle back seam of the skirt. Its main task is to ensure freedom of movement.

How to handle the slots of Dior on a skirt: a master class

We will consider the processing of classic slots using the example of a narrow dress from Burda 2/2018:

Master Class

Best-seller
Special offer

Narrow dress

Magazine: Burda 2/2018 Pattern: 113 Sizes: 34 - 44 This narrow dress is worthy of Haute Couture collections! Its original cut with elongated averages ... 200 p. 99 p. Add to cart This narrow dress is worthy of high fashion collections! Its original cut with elongated averages ...

Step 1

Mark around the details of the paper pattern on the fabric using a ruler and tailor's chalk: allowances for hemming - 4 cm, for cuts of a single-cut slot - 1.5 cm. Cut out the details.

Step 2

On the left rear panel of the skirt, cut the grooves to cut off, not reaching 1.5 cm from the marked line "left edge". Oversizes over the middle sections of the back panels of the skirt. On the back panels, grind the tucks, iron the depth of the tucks to the line of the middle of the back. Fold the rear panels with their front sides, sweep the middle sections, sweep the slot. Slices cut off from the slots mark, not reaching approx. 5 cm to the cut mark (arrow). Fasten at the ends of the seam.To cut the right back panel of the skirt from the end of the stock allowance under the slot close to the line (arrow).

Step 3

Iron the middle seam allowances to the notch. Iron allowances at the edges of the slots from the notch on the left rear panel of the skirt. Iron the seam allowance under the slot of the right back panel of the skirt on the wrong side, mark the upper sections to the panel of the skirt. To stitch the left back panel of the skirt from the front side obliquely according to the marking, fixing the grooves of the slots and the allowance for the slot. At the beginning and at the end of the line, sew the stitches. Remove basting from the slots.

Processing a section of a sleeve with a cuff: master class

Step 4

Make side seams and finish the middle seam of the back of the skirt.

Step 5

Spread the grooves again. Overcast the hem at the hem of the bottom of the dress, sweep over the seamy side, iron and sew manually with unstretched stitches. The stitches should not be visible on the front side. Unscrew the grooves of the slots again on the wrong side and sew them by hand to the bottom hem.

Send